All

• Lightweight compact monopod is ideal solution when a tripod is not practical
• Davis & Sanford by Tiffen Vista Trailblazer Lightweight Compact Monopod - Case - Davis & Sanford 10 Year Warranty Maximum Load: 7 lbs
• Foam handle with strap for easy handling
• Trailblazer - Davis & Sanford by Tiffen's best monopod for video
• Rubber/retractable spike bottom

Specs:
Load Capacity: 7 lb / 3 kg
Maximum Working Height: 68" / 172.7 cm
Folded Length: 21.0" / 53.3 cm
Materials: Aluminum Alloy
Weight: 1 lb / 0.45 kg

Camera Mounting Screw: 1/4"-20 Male

Leg Lock Type: Flip Lock

• Davis & Sanford Quick Release Plate for FM18 Head
• Fits ProVista Airlift with FM18 Head
• Fits ProVista 7518B with FM18 Head
• Fits ProVista GR18 with FM18 Head

• Supports 18 lbs (8.2kg)
• Mid-level Spreader
• Dual adjustable pan handles for greater control
• 75mm Claw Ball
• Double strut top leg sections enhance stability

The ProVista 7518 Tripod is designed for videographers who need a heavy-duty tripod for a variety of field, studio, educational, and industrial applications. It supports cameras weighing up to 18 pounds. The ProVista is a three-section aluminum tripod with a non-glare black anodized finish. Quick release leg locks are easy to use even in the cold. For fast setup, the locks flip open and close with only a half twist. The top-leg section of the tripod has double-strut construction for stability. A 75 millimeter claw ball adds mobility and stability to your shooting. The 3/8"-16 mounting screw will accept most professional tripod heads. The rubber feet provide traction on any surface, indoors and out. Maximum height for the ProVista is 64 inches, minimum height is 31 inches. Tripod weight without a head is 8 pounds.Matched up perfectly to the ProVista 7518 tripod is the FM18 Fluid Head, which can also hold up to 18 pounds. Designed for heavy-duty use with Mini DVs and large camcorders, offering fluid-smooth 360 panning and 90 up-and-down tilting. Separate, easy-grip knobs lock and unlock the panning and tilting mechanism.

Mid level spreader included adds additional support Rubber feet grab any surface. Non-glare black anodized finish Maximum Height - 64 Maximum Load - 18 lbs. Minimum Height - 28 Tripod Weight - 10 lbs. 3 oz. Includes FM18 Head Fluid head with 18 pound capacity ensures smooth operation. Sliding quick release plate system affords variable balance control. 2 adjustable removable pan handles provide easy maneuverability. Independent tilt

Q&A

I want put a slider onto the tripod and it requires me taking off the fluid head to put on the slider, How do I remove the fluid head?

How does your slider attach? The FM18 head has a 1/4 20 and a 3/8 16 thread on its own quick release plate.If you need to remove the head you must unscrew the rubber handle which hangs between the legs. Once this is remove the head can be removed with the ball claw attached to it. There will be some allen screws on the bottom of the ball claw... you can also remove these if necessary.
Answered by Tiffen Support on Jan 10, 2016

What is the size of the screw that attaches the camera to the quick release plate; 1/4 or a 3/8 ?

The screw is the standard tripod mount, 1/4 - 20. (1/4 inch, 20 thread per inch). Hope this helps. It's a great tripod.
Answered by David S. on Feb 18, 2015

Is this a true fluid head?

it sure feels like it. I've found it to always have good motion. 
By Josh Hayes on July 9, 2014

The rubber feet of the tripod is appropriate for use on the ground or in the sand?

This tripod will work well on firm ground. If you are using it in the mud or sand I would recommend placing it on something to keep it out of the mud or sand. You can use small squares of plywood, floor tiles also work well. This will keep your tripod stable and clean.
Answered by Tiffen Support on Jan 14, 2016

• Compatible with THETA Z1 Dual 1" sensor spherical digital camera
• Protects both optical lenses
• Can be Used as additional support for use on flat surfaces.

• Three Aspherical Elements
• F-Mount Lens/DX Format
• Aperture Range: f/2.8 to f/22
• 16.6-30mm (35mm Equivalent)
• New modern and comfortable design for better handling
• New coating providing improved resolution and efficient flare management
• Constant size whatever the focal and focus for easier stabilizer calibration.

An updated classic, designed for more intuitive and interactive use, the Nikon F-mount Tokina atx-i 11-20mm f/2.8 CF is an ultra-wide zoom that is ideal for landscape, architecture, interior, and astrophotography applications. Its bright f/2.8 constant maximum aperture affords consistent brightness throughout the zoom range and benefits working in available lighting conditions.

The optical design incorporates a series of aspherical and low dispersion elements, which suppress a variety of aberrations for improved sharpness and clarity. Individual elements are also multi-coated to resist flare and ghosting for greater contrast and color accuracy when working in bright or backlit conditions. Complementing the optics, this lens features a One-Touch Focus Clutch Mechanism for fast-changing between AF and MF settings, and the internal focusing design is used for responsive focusing performance.

Waterproof and chemical resistant, this black Small Hard Case 3005.B with Foam from Explorer Cases is humidity and dust resistant, and made of a copolymer polypropylene compound. Within interior dimensions of 11.8 x 8.3" and a total interior depth of 2.8" from the lid and base, you can transport your choice of sensitive gear such as a single pistol or electronics. The case includes pre-cubed foam layers to protect your equipment.

The exterior of the case features counterbalancing supports and has a lid that can be set to slide off by releasing the back screw and opening it at a 70-degree angle. There is a top grip handle to carry the case.

Here is what you get:

• Explorer Cases Small Hard Case 3005 with Foam (Black)
• Waterproof Removable ID Label
• Interior Pre-Cubed Foam Layers
• Limited Lifetime Warranty

Product Highlights

• Transports a Single Pistol or Other Gear
• Interior 11.8 x 8.3" Dimensions
• Total Interior 2.8" Depth
• Interior Pre-Cubed Foam Layers
• Corrosion-Proof Metal Hinges & Lid Stay
• Waterproof & Chemical Resistant
• Resistant to Humidity & Dust
• Copolymer Polypropylene Compound
• Waterproof Removable ID Label
• Top Grip Handle

Explorer Cases 3005 Specs

Packaging Info

• Optimal for recording drums, guitars, almost any instrument and back up vocals
• Frequency range:30-17,000Hz
• Nominal Impedance: 200 Ohms

• Fluid head offers Silky Smooth Panning
• W3 Dolly included
• 75mm ball for quick and accurate set up
• Supports Cameras up to 18lbs
• Built in quick release system

Description

The Davis & Sanford ProVista 7518 Tripod is a three-section aluminum tripod with a non-glare black anodized finish. Quick release leg locks are easy to use even in the cold. For fast setup, the locks flip open and close with only a half twist. The top-leg section of the tripod has double-strut construction for stability. A 75 millimeter claw ball adds mobility and stability to your shooting. The 3/8"-16 mounting screw will accept most professional tripod heads. The rubber feet provide traction on any surface, indoors and out. Maximum height for the ProVista is 64 inches, minimum height is 31 inches. Tripod weight without a head is 8 pounds.

Matched up perfectly to the ProVista 7518 tripod is the FM18 Fluid Head, which can also hold up to 18 pounds. Designed for heavy-duty use with Mini DVs and large camcorders, offering fluid-smooth 360 panning and 90 up-and-down tilting. Separate, easy-grip knobs lock and unlock the panning and tilting mechanism. <p>Mid level spreader included adds additional support Rubber feet grab any surface. Non-glare black anodized finish Maximum Height - 64 Maximum Load - 18 lbs. Minimum Height - 28 Tripod Weight - 10 lbs. 3 oz. Includes FM18 Head Fluid head with 18 pound capacity ensures smooth operation. Sliding quick release plate system affords variable balance control. 2 adjustable removable pan handles provide easy maneuverability. Independent tilt

 The Davis & Sanford W3 Tripod Dolly is a universal folding/adjustable dolly that fits any tripod. It can be easily attached and removed, and folds with carry handle for compact transport. The 3-inch ball bearing rubber/metal wheels with step-on brake locks/unlocks rolling and swivel movement. It has a maximum load of 35 pounds, folds to 24-by-7-inches, and has a circle diameter of 31 inches.

• Holds Your Lens Cap
• Prevents Losing Your Lens Cap
• Small & Convenient

• Dual extrusion with lifting nozzles: print almost any geometry with accuracy and reliability

• Fully enclosed chamber: controlling the printing environment is crucial for print quality and safety

• Full connectivity: Wi-Fi, usb stick and a great integration with email, file sharing services and social networks

• Although open to using third-party filament, Portrait’s cartridges and enclosed chamber prevent KODAK 3D Printing Filament from absorbing humidity or dust

• Automatic calibration and leveling for a seamless 3D printing experience

Description

Store and protect your valuable gear in this waterproof and chemical-resistant, black Large Hard Case 13527 BE with Wheels from Explorer Cases. This case is a humidity and dust resistant case made of a copolymer polypropylene compound. With interior dimensions of 53.2 x 13.8" and a total interior depth of 10.7" from the lid and base, one can transport sensitive gear such as electronics, satellite communications devices, computers, military equipment and more. To carry the case, there are two side grip handles and a large front handle, as well as six wheels with bearings.

Here is what you get:

• Explorer Cases Large Hard Case 13527 BE with Wheels (Black)
• Waterproof Removable ID Label
• Limited Lifetime Warranty

Products highlights:

• Transports Sensitive Devices
• Interior 53.2 x 13.8" Dimensions
• Total Interior 10.7" Depth
• Large Interior Space for Gear
• Corrosion-Proof Metal Hinges & Lid Stay
• Waterproof & Chemical-Resistant
• Resistant to Humidity & Dust
• Copolymer Polypropylene Compound
• Waterproof Removable ID Label
• Side Grip Handles & Wheels

Explorer Cases 13527 Specs

Environmental

General

Packaging Info

• Full, impressive, lively sound for drums and percussion
• Compact body ideal for mounting on toms and snares
• Excellent sound profiling,adapts to all percussive styles
• Robust reinforced metal casing
• 10 year warranty

• Professional studio-quality sound
• Front-facing headphone jack auto-defeats speaker output
• Flexible inputs - 1/4”, 1/8”, and RCA
• 50 watts of clean, articulate stereo sound
• Hookup cables included

CR Series Creative Reference Multimedia Monitors offer studio-quality sound with cosmetics that compliment any desk whether you’re making music, creating content, or just relaxing to your favorite tunes. CR4-X 4” monitors feature a sleek design with a brushed-metal panel and distinct outline. Convenient front panel headphone out and volume control make daily use easy. Flexible rear panel inputs include balanced 1/4" TRS, 1/8” Stereo, and RCA. High-quality cables are included in the box to get you up and running quickly. Upgrade your listening experience with Mackie CR4-X monitors.

• Dynamic Capsule Design
• Cardioid Polar Pattern
• 5-Position Bass Roll-Off
• Includes Lock-On Stand Adapter
• 30 to 17,000 Hz Frequency Response